Best Roof Snow De-Icing Cable Kits


Prevent winter damage to the roof, gutters, and downspouts with an Easy Heat ADKS Roof Snow De-Icing Kit. The simple yet effective design features a low-profile, black cable that snakes along outdoor surfaces and provides an uninterrupted path for melting water to flow without re-icing and forming dams. Suitable for almost any inclined roof and approved for both metal and plastic gutters, the cable is easy to install with the included clips and spacers and provides a handy service year in and year out with no maintenance required. It is also CSA Certified and UL Listed, provides 5 watts per foot and 120 VAC, and comes with a three-wire grounded plug and a 6-foot power cord. The cable is available in 30-, 60-, 80-, 100-, 120-, 160-, and 200-foot lengths to fit any sizing need; all mounting hardware is included.
In Stock


In Stock

Install these snow de-icing cables in your roof, gutters and downspouts to prevent winter damage this year. You can prevent costly ice damage from ice dam formation using these roof and gutter de-icing cables to ensure free flow of water from your home’s gutters and downspouts to the ground level. Note that these Easy Heat ADKS snow de-icing cable kits are not designed for flat roofs, metal roofs or on combustible materials. The snow de-icing kit includes a lot of clips for you to attach to the shingles and you can easily install them on your roof and around the house as a DIY project. It takes approximately 30 minutes to install the de-icing cables.


Control expense and energy use in electric roof cable protection automatically with Roof Sentry (RS-2). The RS-2 requires two conditions to be present before it energizes roof deicing cable: cold temperatures (ON, 38-degree F; OFF, 48-degree F) and the presence of runoff water from the roof in contact with its sensor wire. If only one of the conditions exists, the control will not energize the cable.
In Stock

Check out the online low prices for Easy Heat Roof Snow De-Icing Cables with free shipping today!



Easy Heat Roof Snow De-Icing Kits


Our roof and gutter de-icing products are engineered to protect properties from the damage caused by ice dam formations. Easy Heat’s electric heating cables economically and efficiently reduce ice formation along roof edges, in gutters, drains and downspouts to provide a path for melt water, allowing it to flow off the structure. Certified and UL Listed to Canadian safety standards roof and gutter de-icing kits. 5 watts per foot, 120 VAC. Three wire grounded plug with a 6-foot/2-meter power cord. Kits include appropriate number of roof clips and cable spacers.
In Stock


” EASY HEAT ” ROOF & GUTTER CABLE

Size : 30′
ADKS cable
Roof and gutter cable
Capacity is 5w per foot
Self-regulating trace roof and gutter deicing cable
Provides uninterrupted path for melting water, prevents water and ice damage to roofs
Shingle clips and cable spacers included
Easy-to-follow installation instructions
Insulated and grounded
Will not damage temperature sensitive roof coatings
Can be applied anywhere melting snow and ice can refreeze and penetrate roof surface
Prevents costly damage to roofs caused by ice formation and snow accumulation in gutters

In Stock


Cable helps prevent damage by ice build up in gutters, downspouts, and under shingles. Cable maintains a clear path for water drainage. Installs easily with special clips to hold cable securely to roof without damage. Spacers and instructions in each package. Preassembled in several lengths. Can be used with roof de icing control, model
In Stock


In Stock


In Stock


In Stock


With the Bare Ground Bare Blaster Propane Ice Torch, you can quickly remove hazardous snow and ice from slippery sidewalks, steps and driveways without shoveling, scraping or chipping. In the summer, kill ugly weeds in one shot without chemicals. Even use it to patch your blacktop driveway. Easily adjust the flame to suit the situation. A 31in. reach means there’s no bending or stooping required. Made of nickel-plated steel and brass to withstand the elements. Weighs under 4 lbs., including the propane cylinder cylinder not included. A great alternative to salt and chemicals, this clean-burning torch easily screws onto standard 14 oz. or 26 oz. propane tanks. Hose Length ft. 2 1/2, Handle Length in. 31, Tank Included No. Multi-use operation melts snow and ice, kills weeds, patches blacktop Adjustable flame for various situations Long 31in. reach eliminates bending or stooping Durable nickel-plated steel and brass construction Lightweights – weighs under 4 lbs. with cylinder Uses standard 14 oz. or 26 oz. screw-on propane tanks
In Stock


Each set of HeatTrak Residential Mats and HeatTrak 120V Industrial Stair Mats requires one HR-P Power Unit to connect the system to an electrical outlet. If you don’t buy a HR-P Power Unit for these systems, your mats will not work. This item is not required for HeatTrak Industrial Walkway Mats. The HR-P Power Unit connects your system to a 120V electrical outlet and allows power to flow to the mats. You can connect up to 13 amps on a single Power Unit. If your connected mats (either Residential Mats or 120V Industrial Stair Mats) exceed 13 amps, you will have to split up the mats and add a second Power Unit to plug into a separate outlet. The Power Unit contains a watertight connector that will allow it to connect to the first or last mat in your system. The unit is rainproof and is designed to be left outside for the entire winter season. Power Unit contains a 6 foot cord and inline Ground Fault Circuit Interrupter. If your electrical outlet is further than 6 ft away, consider using a watertight cable extender (see Model No. HR-EXT25).
In Stock


Keep your home stairs safe and snow-free all winter long with HeatTrak’s Residential Snow-Melting Stair Mat. This electric heating mat melts snow on contact to prevent snow and ice accumulation on stairs around the home. Simple to use: Just lay it out, plug it in, and watch snow melt on contact. No more Shoveling, No more Salting, and No more Slipping! Each Residential Mat is designed with watertight connector cables enabling it to connect to additional Residential Mats. Connect Residential Stair Mats and Residential Walkway Mats to cover any size area! Each set of Residential Mats requires 1 HeatTrak Power Unit (sold separately, Model HR-P) to connect the system to an electrical outlet. Up to 13 amps can be connected on a single Power Unit; That’s either 15 Residential Stair Mats, 5 Residential Walkway Mats, or any combination thereof. See Selection Guide in the Product Details section for more information. Each mat sold separately. Size: 10 Inches x 30 Inches, Amps: 0.6, Voltage: 120Vac, Material: Customized Thermoplastic. When ordering, remember these important points: The Power Unit is not included; Each set of HeatTrak Residential Snow-Melting Mats requires 1 Power Unit (model no. HR-P) to connect the system to an electrical outlet. If you don’t buy a Power Unit your mats will not work. This item requires a 120V electrical outlet. This mat is for snow-melting only; Never cover mats, never use indoors, and never use for animals or animal houses. Do not use on composite decking. The mat is waterproof and designed to be left outside all winter long. Residential Products can only connect to Residential Products; They do not connect to Industrial Products. Each mat sold separately.
In Stock



Do make sure you buy the correct length of snow de-icing cable. For example, if you have a 30 feet roof, you will need at least 60 ft of de-icing cables to form a loop about 16″ apart, for effective coverage. Add in the length for the downspout and your gutters if you have one. The Easy Heat snow de-icing cable kits are available in 30-, 60-, 80-, 100-, 120-, 160-, and 200-foot lengths and include all the cable mounting hardware required. These Easy Heat Snow De-Icing Kits are CSA Certified and UL Listed.



Leave a Reply